Air Filters For Chemical
Air Filters For Chemical (for chemical )
-------------------------------------------------------------------------
This product is applied in the front-end air filtration system of the chemical industry, with an efficiency typically ranging from ≥ 99.95% to 99.995%. The filter paper is separated by wavy aluminum foil or double adhesive paper corrugated sheets, and the inlet and outlet surfaces are equipped with protective nets, which are beneficial for protecting the precision equipment at the rear end under extreme conditions.
● Single flange or plate frame form
The thickness of the filter is usually 220mm or 292mm
Usually efficiency H13 H14
● Optional efficiency E10~E12
Product Introduction
Materials and Applicable Environment
Outer frame: galvanized sheet/stainless steel
Filter material: Glass fiber filter paper
Partition: Aluminum foil/double adhesive paper
Sealing gasket: Closed cell EPDM/PU foam seal
Operating conditions: maximum 100% RH, temperature not exceeding 80 ℃
| Conventional dimensions and basic performance parameters | |||||||
| External dimensions L×W×D | Rated air volume（m³/h） | initial resistance（Pa） | |||||
| counting efficiency F7@0.4μm80%≤E＜90% | counting efficiency F8@0.4μm90%≤E＜95% | counting efficiency E10@MPPS 85%≤E＜95% | counting efficiency E12@MPPS 99.5%≤E＜99.95% | counting efficiency H13@MPPS 99.95%≤E≤99.995% | counting efficiency H14@MPPS 99.995%≤E＜99.9995% | ||
| 592×592×292 | 1850 | 60 | 70 | 110 | 160 | 200 | 250 |
| 630×630×220 | 1500 | ||||||
| 610×610×292 | 2000 | ||||||
| 单法兰592×592×292 | 1650 | ||||||
| Note: Non standard filters can be made within the range of 150 ≤ L ≤ 1800, 150 ≤ W ≤ 740110 ≤ D ≤ 292. | |||||||
Related products
