Liquid tank without partition HEPA filter
Liquid tank without partition HEPA filter
-------------------------------------------------------------------------
The liquid tank high-efficiency filter is a high-efficiency filter made of a non partition filter element and a liquid tank sealing structure. Due to the excellent resilience of silicone gel commonly known as jelly glue filled in the liquid tank, this sealing form has high reliability and no leakage, and is suitable for on-site DOP dust detection.
● Clean room end air supply or purification equipment exhaust air supply
There are two types of liquid tanks: top liquid tank and side liquid tank
The thickness of the filter is usually 90mm, 93mm, 110mm, and 117mm for the measuring tank, and 95mm for the top tank
Pure H14 (EN1822) grade, with a minimum detection particle size of 0.1~0.2 microns ≥ 99.995%
Before leaving the factory, MPPS scanning of the most easily penetrable particle size is performed on each unit
Product Introduction
Materials and Applicable Environment
Outer frame: Aluminum profile
Filter material: Glass fiber filter paper
Partition: Hot melt adhesive
Gasket: silicon gel
Operating conditions: maximum 100% RH, temperature ≮ 50 ℃
| Conventional dimensions and basic performance parameters | ||||
| External dimensions: Inlet surfaceL×W×D | Rated air volume（m³/h） | H14initial resistance（Pa） | H14Suggested final resistance（Pa） | efficiency@MPPS |
| 320×320×93 | 350 | 220 | 450 | 99.995%≤E＜99.9995% |
| 360×360×93 | 500 | |||
| 484×484×93 | 800 | |||
| 630×630×93 | 1500 | |||
| 610×610×93 | 1450 | |||
| 915×610×93 | 2100 | |||
| 1220×610×93 | 2900 | |||
| Note: According to GB/T 6165 and EN1822, filters made of fiberglass filter materials are used, The particle size for calculating MPPS efficiency is 0.1~0.2 μm, not 0.3 μm |
||||
Related products
